Instruction on how to use the autoclave

  1. First make sure if Jacket is on (it will be showing on the screen on the top right corner). If it is off, press the jacket bottom.
  2. Press number 1 to select cycle.
  3. Select the cycle you wish (2 for dry or 3 for fluid).
  4. Press 9 to exit the next 4 screens. These screens are showing the cycle details. Make sure you come back for the Main menu screen.
  5. Press the run bottom.
  6. Enter our lab room number 4062 and press enter.
  7. The run should start and the receipt should start to print.
  8. Write down in the logbook located on the top of the autoclave control.